3 Week Jeep

[KING BLING]

The Project. A Daily Driven Trail Rig Thats Hardcore!

88 Wrangler
Old Cj Look
Stretch Wheelbase Like An Unlimited
Unimog Axles
At Least 40's
Full Cage To Cover 4 Passengers
Lots Of Power
Automatic
Steel Sides And Corners

We Are Nearly Finishing Up With The 3 Week Jeep.the Project Started Nearly Three Weeks Ago And Has Only Been Worked On 8 Full Days And Many Nights. We Thought You Might Want To Check Out The Progress Of This Jeep From P.o.s To Bad *** Ride.
Ill Post Picks Daily.

[KING BLING]

Here Is The 4cyl P.o.s.

[KING BLING]

Yuck!

[xjmoser]

Why the Cj front?

[KING BLING]

Everyone Has A Yj, Just A Different Look.

[JOE THE TOE]

Hey,is that a 1-ton master cylinder set up in that stock rig?

[JOE THE TOE]

You know what's funny is if you look at the first picture & the last the sweeper-boy in the background is in the same position!!

[Sauce]

post up the finished pics!!! I saw this on friday night and it is badass. I want it!

[Connect]

It's done already? Damn they are fast

So basically sticking with the leafs, on mog's, supercharged I-6?

[JOE THE TOE]

Wrong again,you'll just have to wait & see.I heard that it's going to have a badazz @#^!*^^$ motor in it!

[KING BLING]

That Is Our 1 Ton Master Conversion $125.00 Installed.

[KING BLING]

So Heres The Motor Conversion

Gm 350ho Crate Engine (300)hp
Tbi Fuel Injection
90's Serpentine Set Up
1 5/8" Shorty Headers
3" K&N FILTER
Taylor Wires
Gm700r4 Transmission W/lockout
Custom Adapter To An Ford 208 T-case.
Fr & Rear 32 Spline Outputs
1410 Yokes
Afi Custom Wiring Harness And Prom Chip. (removes All Emissions)
We Sell The Wiring Harness For $245.00 (3 Wire Hook Up)


At This Point We Pulled All The Stock Junk, Wiring, Ect And Painted The Firewall.

[KING BLING]

2

[KING BLING]

The Motor Mounts And T-case Mount Are All Polyurethane Mounted.
To Clock The T-case Up Enough To Have A Smooth Belly We Cut A Hole In The Tub To Clear Everything.
It Turned Out FRIGGIN AWESOME!
I Forgot Picks Of The T-case Mount? BOO ME

[xjmoser]

The Motor Mounts And T-case Mount Are All Polyurethane Mounted.
To Clock The T-case Up Enough To Have A Smooth Belly We Cut A Hole In The Tub To Clear Everything.
It Turned Out FRIGGIN AWESOME!
I Forgot Picks Of The T-case Mount? BOO ME

Is that the flinstones drive in the bottom pic?:wave:

[Connect]

Old old School who needs a small black chevy?

[JOE THE TOE]

I DO,I DO....PICK ME PICK ME!!:wave: :wave:

[xjmoser]

Old old School who needs a small black chevy?

What kind of a small black chevy?




:wave:

[CANYON KRAWLER MIKE]

hell i would just like to have a 7m-get

[JOE THE TOE]

What the hell is a 7m-get?

[Connect]

he wants a 7m to get bananas????

I'm thinking a 350 with a 383 stroker package with the LS1 ramjet fuel injection system, hooked up to a SM645 granny tranny with a 6:1 atlas TCASE followed up by twin mog'd 60's...

[sten_mitchell]

What the hell is a 7m-get?

7MGTE IS the turbo supra DOHC straight 6..... Actually a pretty easy swap into a P/U!!!

[CANYON KRAWLER MIKE]

it's like your I-6 but way more getting it!!

[JOE THE TOE]

Shouldn't You Be Working?

[KING BLING]

Up Early I See. Ya, The 350 Ho Is Old School, But It Gets It Done. I Would Still Like To Put A 04' Vortec 5.3 In It (330hp), But Im Not Shure If The Horsepower Outways The Additional Cost