3 Week Jeep

[Reno Computer Repair]

It is looking P.I.M.P. .

Is this being built for a customer, or as a company truck?

Sorry it took me so long to post on this, but all those pictures have been my fantasy gear for the shower excercise

[GloNDark]

That Is A Bad Xj. This Is Trevors Rig, We Did This One About 7 Months Ago. I Think Its One Of The Sickest Exo's Ive Seen.


We Should Start A New Topic With A Bunch Of The Vehicles We Have Fabbed Up?

We saw that rig last month in truckee. The opinion of our group was that is THE Cleanest EXO we have ever seen. I actually had to turn around and go back to check it out. Very nice!

[KING BLING]

SORRY FOR THE LACK OF UPDATES, WE HAD A NEW BABY GIRL SUNDAY NIGHT, SO I'VE BEEN A LITTLE BUSY.


SO HERE ARE ALL THE PICKS OF THE FINAL FAB WORK AND COMPLETED JEEP.
THE TOTAL TICKET FOR THIS PROJECT INCLUDING THE JEEP IS SOME WHERE BETWEEN 26 TO 30k.

HERE IS THE COIL SPRING SUSPENSION

[KING BLING]

ON ITS FIRST OUTING, WE LET SOMEONE DRIVE IT HOME FROM MOONROCKS AND THEY DIDNT REALIZE IT WAS (A) IN 4 LOW, (B) SCREAMING AT 5500 RPM, OR (C) NOTICE THE TEMP GUAGE PEGGED AT 260+ DEGREES, AND BLEW THE MOTOR.:chairhit: :chairhit: :chairhit:

WE PUT ANOTHER ENGINE IN IT AND ITS BACK OUT AGAIN.

[KING BLING]

Here Are Some Picks Of The Air Rams We Used To Enguage The Factory Unimog Lockers. The Rams Are Run By 2 Air Toggles And Are Fed By A Onboard Co2 System.

[KING BLING]

Picks Of The Custom Soft Top Extended 10"

Pick Of The Interior And Seats

We Also Covered The Door Panels In The Same Canvas As The Top.

[KING BLING]

The Under Belly Skid Plate. Made Of 1 5/8" 1.34 Walll And 1/4" Plate.

[KING BLING]

We Have Taken The Jeep Out To Moonrocks And Twister And It Works Great.

Here Are The Final Picks With The New 42" Irocs And Marsh Racing Beadlocks WITH 2.5" BACK SPACE.

THIS THING IS WIDE.

[xjmoser]

You guys built a badass rig. Can I come play in the shop........

[KING BLING]

LOOK AT THE GROUND CLEARANCE.


ONE OF THE POINTS OF THIS PROJECT IS TO FINISH IT UNDER 30k.

THIS IS JUST ONE WILD EXAMPLE OF WHAT WE CAN DO.

AN EXAMPLE THAT WE TELL OUR CUSTOMERS IS, IF YOU WERE TO BUY A NEW JEEP TJ OR RUBICON AND FIX IT UP WITH A LONG ARM LIFT, WHEELS AND TIRES, ROCK PROTECTION, CAGE, ECT. YOUR FINAL DOLLAR WILL BE BETWEEN 33K TO 40K FOR A GOOD RIG. BUT NOT A GREAT ROCK CRAWLING MACHINE.

THESE RIGS ARE ALL NEW AND CAN BE FULLY CUSTOMIZED.

PICK YOUR PAINT, INTERIOR, SEATS, ROCK PROTECTION, AXLES, ECT.

IF YOU WOULD LIKE TO DO A PROJECT BETWEEN 15 TO 40K, WE OFFER 100% FINANCING AND WOULD BE MORE THAN GLAD TO SIT DOWN WITH YOU AND DISCUSS YOUR NEEDS.

[Connect]

Wow that thing is insanely beautiful!! If I had $30k for a nice rock crawlin rig I'd definatly be headin to you guys. missing some rockcrawling pics but it's pretty parked over it's 5 gallon bucket

So you gonna sell it, keep it as a promo vehicle, or is it a customer?

[Denis]

SORRY FOR THE LACK OF UPDATES, WE HAD A NEW BABY GIRL SUNDAY NIGHT, SO I'VE BEEN A LITTLE BUSY.

Congrats!!!

[Denis]

wouldn't you want to mount the axle-side wishbone joint with a bolt going vertically? seems like the sideloads would destroy the joint faster mounted the way you did it. any specific reason for this?

also, do they make high-steer arms for MOG axles, so the tie-rod is higher?

[KING BLING]

We Did It This Way Mostly Because Of Clearance Issues. When Using Heims The Side Load Makes A Huge Difference So You Have To Mount Them Vertical.
The Rubicon Joints Hold Up Pretty Good So You Can Still Get Long Life Out Of Them.

They Do Make Hy-steer Kits For The Mogs, But They Run Around 1100.00 PER SIDE, So Its Not Worth The Extra Exspense.
The Tierod Looks Low But It Is Actually 22.5" From The Ground.

[Denis]

We Did It This Way Mostly Because Of Clearance Issues. When Using Heims The Side Load Makes A Huge Difference So You Have To Mount Them Vertical.
The Rubicon Joints Hold Up Pretty Good So You Can Still Get Long Life Out Of Them.

They Do Make Hy-steer Kits For The Mogs, But They Run Around 1100.00 PER SIDE, So Its Not Worth The Extra Exspense.
The Tierod Looks Low But It Is Actually 22.5" From The Ground.

BTF makes 404Mog high steer arms $200 per side.
http://www.bluetorchfab.com/oscomm/c...Path=26_43_120

[Rafterman]

That Is Our 1 Ton Master Conversion $125.00 Installed.

That price is parts and instaltion?

[PizzaJeep]

hey jake what is the overall width of the jeep??

[KING BLING]

91" Outside Of Tires

[PizzaJeep]

how bout those air rams for actuating the lockers.. where'd ya find them??


also... what is the stroke of the front axle's turning? will an 8" stroke ram be too much or too little? who do you normally go through to get your orbital and rams?

[72 Virginians]

Bump for the new folks.

Wow, it's been almost a year since this one started. Anyone know of the whereabouts of this rig?

[Scrub]

its jakes rig, i think he still drives it as his Daily Driver.

[Sauce]

he sold it...

[Denis]

Crawl Magazines 3 Week Jeep - Pirate4x4.Com Bulletin Board

[Scrub]

he sold it...

that makes sense to why i see him driving the limo around now.....

[ChaseNme]

WoW That is a killer Jeep I think I am going to be giving you a call to build me one of those bad mamma jammas great work